Can a 10 speed cassette fit on a 9 speed hub?

The most you should need to do to allow a 10 speed cassette to work on most 9 speed hubs is install a spacer behind the cassette to make sure the cassette seats tightly. This same compatibility holds true for the new 2005 Ultegra 10 speed components.

Are 9 and 10 speed cassettes the same width?

they are the same width. The distance between the 9 speed gears is ever so slightly wider than on a 10 speed cassette (hence why 10 speed chains need thinner side plates than 9 speed ones.

Are Shimano 9 and 10 speed compatibility?

A 9-Speed Derailleur Can Work With a 10-Speed Cassette Only On Road Bikes. Luckily, the rear shift ratio of Shimano's road bike groupsets is the same for 8, 9, and 10-speed transmissions. Hence why it's possible to combine a 9-speed derailleur with a 10-speed cassette.

Can I put an 11 speed cassette on a 9 speed hub MTB?

An 11-speed cassette will fit on a 9-speed hub only when the hub is wide enough. Luckily, 8,9,10 and 11-speed mountain bike hubs have the same spacing, and one can therefore use an 11-speed cassette on all of them.

Can you change a 9 speed to 10 speed?

9 speed and 10 speed cassette are the same size.. they fit all the same wheels N hubs. only diff is the spacing between the rings and the thickness of the chain. you'll need a new shifter, derailleur and chain to make a 10 speed work on a 9 speed.

Can you use 9 speed shifter with 11 speed cassette?

9 speed (or8,7,6) MTB mechs won't work with 10 or 11 speed shifters.

Can you use a 10 speed cassette on a 9 speed bike?

You can put a new 10 or 11 speed cassette on any of the older 9 speed hubs. So, regardless of brand, feel free to buy your wheels a nicely upgraded new steed.

Will a 9 speed chainset work with 10 speed?

A nine speed crank set will work with a 10 speed drive train. However it's not all plain sailing. You can have trouble using a 10 speed FD with a 9 speed crank set. It doesn't shift as far out as the 9 speed so you may experience sloppy changes to the outer ring and chain rub against the FD in some gears.

Will a 10 speed front derailleur work with 9 speed?

Because the 9 speed cassettes width is the same as the 10 speed,and the width of the chain coupled with the distance between the front mech plates has been designed to work together,you wont experience excess rubbing in the extremes.

Are all 10 speed cassettes the same width?

9/10 speed shimano cassettes are the same width overall / are interchangeable.

How wide is a 9 speed cassette?

Depending on what you need, you may want to consider researching the specific cassette you plan to buy as the values might vary slightly. To give you some idea of the measurements of different bike components, here are some estimates: For Spacer Width: 8 Speed (3.00mm), 9 Speed (2.56mm)

Can I use a 9 speed derailleur on a 8 speed cassette?

Condensed answer: 8 and 9-speed derailleurs have the same rear shift ratio but only when both models are made either by Shimano or SRAM. In consequence, a 9-speed derailleur can work just fine with an 8-speed cassette produced by the same brand.

Can you use a 9 speed derailleur on a 7 speed bike?

You'll be fine. I had a Deore 9-speed rear derailleur with a no-name Shimano 7-speed cassette and worked fine. The only thing is that you may need a bit more adjustment on the derailleur for the first setup because of the change.

Are all front derailleurs compatible?

In addition, front derailleurs are made for either 7, 8, 9 or 10-speed chains, but they can often be used interchangeably. If you are using a different chain than your derailleur was made to work with, the degree of adjustment you can expect will be lower than with a matched set.

Can I use a 10 speed chainring with a 9 speed cassette?

New Chainrings, Old Chains

And even if you were to experience the problem described, just opt for a 10 spd chain. It'll work fine with your 9 spd cassette.

Can I use an 11 speed crank on a 9 speed bike?

Secondly a 11spd Crankset will work with your 9spd set-up, but you will need to run a 10spd chain which will work on the 11spd Crank and 9spd Cassette.

Will a 9 speed crankset work with 8 speed?

Yes, there are no complications with running a 9 speed crankset on an 8 speed drivetrain.

Which is better 9 speed or 10 speed?

Depending on what manufacturer you go for, 10 speed is usally only one more speed than a 9 speed, and not even so because your gear ratio don't change much. Ten speeds are harder to deal with in setting up because they tend to be more finicky.

Will a 11 speed cassette fit on a 10 speed hub?

Yes. The 34t fits in the same way that 11spd Shimano mtb cassettes fit with the largest cog dished over the hub flange. Yep that's the jist.. 11-32 is 11 speed road only, 11-34 is 8/9/10 spd road and 11 spd mtb compatible so will fit on your Deore 10 speed hub.

Can you use a 10 speed derailleur on a 12 speed cassette?

-10 speed shifter sets your throw to match the rear cassette. -chains have the same outer dimension, the 12 speed derailleur would have narrower cogs than what required for a 10 speed. -As long as you can set the high/low limits on the derailleur to keep it on the cassette it should be fine.

Can a 10 speed derailleur work on a 11 speed cassette?

10-speed rear derailleurs do not work accurately with 11-speed cassettes when coupled with index shifters. The only exception are SRAM's 10-speed exact actuation road derailleurs which have the same rear shift ratio as SRAM's 11-speed road (exact actuation) and 10-speed MTB (exact actuation) derailleurs.

Can I use a 10 speed shifter with a 8 speed cassette?

A 10 speed chain should work on an 8-speed drivetrain. if you want 10 speeds, you will need a 10 speed-specific chain, cassette, derailleur and shifter (and a new cable while you're at it).

Can you replace a 8 speed with a 9 speed cassette?

Since the 8-speed sprocket and the 9-speed sprocket are the exact same size, it is possible to convert to 9-speed without changing the wheel. Simply remove the current 8-speed cassette sprocket and replace it with a 9-speed cassette sprocket to convert to 9-speed.

Can I use a 10 speed derailleur on a 7 speed cassette?

If you have a 10-speed derailleur of any kind, it will work with a 7-speed cassette as long as you use friction shifters.