How do I put Di2 in Bluetooth mode?

The modern Di2 batteries allow you to enter Bluetooth LE connection mode. Note that this Bluetooth connection only works if you have a Wireless Unit on your bike. With a BT-DN110 or BM-DN100 battery installed: Press-and-hold the button for 0.5 seconds to enter Bluetooth LE connection mode.

Does my Shimano Di2 have Bluetooth?

It's now possible to add Bluetooth connectivity to your Di2 bike and this post is to tell you how and why you might want to do this. Those of us with Di2 groupsets might not be aware that Shimano are rolling out regular firmware updates as they fine tune and add further functionality to their Di2 platforms.

How do I connect my Shimano Di2 to my app?

To connect to the E-TUBE app you simply turn on the power on your bike, open the app and tap the flashing 'connection' icon in the top right corner. Next, tap 'connect' and then you're set up and ready to go!

How do I connect my Shimano Di2 to my Iphone?

Start the app and connect

Once you've downloaded the app put your bike in connection mode by pressing the button on your junction box until the red and green LEDs start flashing alternately. Make sure your phone/tablet's Bluetooth is switched on and tap the bike you'd like to connect to.

Does my Di2 have wireless?

The Di2 wireless units and displays allow you to connect your Di2 system to plenty of Bluetooth/ANT compatible devices. They let you connect to your bike computers, including (but not limited to): Wahoo ELEMNT series.

Is XT Di2 wireless?

Utilizing wireless communication, riders can now set up, customize and monitor their Di2 system using Shimano's expanded E-tube software via a smart phone or tablet computer.

How do I connect Wahoo to Di2?

First, make sure your ELEMNT device and phone's Bluetooth are switched on, then open the ELEMNT app on your phone and wait for the ELEMNT to connect. Then tap the SENSORS area, right below your ELEMNT's name. The ELEMNT will now automatically look for new sensors, such as your Di2 bike.

How do I set up Etube?

It's time to get started!

1. Step 1: Download the app. Download E-Tube Project or E-Tube Ride from the App Store or Play Store using your smartphone or computer.
2. Step 2: Connect your bike. Turn on Bluetooth and open the app. ...
3. Step 3: Start customizing. Choose from a collection of pre-defined settings or create your own!

How do you pair EW WU111?

Plug in the EW-WU111. Run the E-Tube App. Make sure bluetooth is on. Hold the button on the bottom of the junction box for about a second and connect with your device.

How do I find my Di2 firmware?

The other method to check for updates is to connect your bike to a computer. Plug in the charger, run E-Tube Project, select your bike type and Connect'. After the connection check is complete the application will let you know about any components that have outdated firmware.

How do I use my Shimano electric bike?

In order to turn on the system, you simply hold down the power button located on the battery, shown below. When it turns on, the lights on the front of the battery will illuminate to indicate battery level, and the display on the handlebar will light up with the “Shimano Steps” logo.

Does Shimano E5000 have Bluetooth?

The SC-E8000 has a limited communication function and the SC-E5000 does not have a communication function, so they cannot be used to connect to E-TUBE RIDE via Bluetooth® LE.

Where do I put the DI2 wireless unit?

Install it near the front of the bicycle to ensure a good signal between the Wireless Unit and bicycle computer. Do not install it on the side of the bicycle. If you do, it could get damaged in a crash or when the bicycle tips over.

How do I reset my DI2 password?

To change the passkey, enter a new key twice. You can also reset the passkey to its initial value (000000) by checking the “PassKey initialization” box. When you're done with your settings be sure to click the Apply button at the bottom left of the window.

How do you reset EW wu111?

1 Answer

1. Connect the bike to your computer using the charger and Junction A.
2. Open the e-Tube windows app.
3. Make a connection by clicking "connection check"
4. Click "Bluetooth LE settings"
5. Set a new passkey.

Is there a Shimano Di2 app?

Shimano's updated E-Tube Di2 programming app is now available on iOS and, for the first time, Android. The app allows users, providing they have the new BT-DN110 internal battery – to customise Di2 functions through Bluetooth-enabled tablets and mobile devices.

How do I connect to ep8?

First, open the app on your phone and tap the big '+' icon to connect a bike. In order to make your bike available for connection, turn on the system or, if it's already on, use the switch unit once. You will then have 30 seconds to select your bike from the connection screen on the app.

How do I connect my Di2 to my bike computer?

Connecting a Di2 bike to a Windows computer is done via the charging/interface port on the Junction A. Modern road bikes, mountain bikes, and gravel bikes will all have this junction and the required interface/charge port.

How do I pair my Wahoo roam?

Pairing to Android

1. Ensure Bluetooth^® and location services are enabled and open the ELEMNT Companion App for Android.
2. After the introduction video, tap Start to pair your ELEMNT/BOLT/ROAM to the app. ...
3. If prompted, enable access to the camera. ...
4. Select Pair when the dialogue box appears to complete the pairing process.

How do I show my Di2 battery on Wahoo?

How can I See My Electronic Shifter Battery Level using the ELEMNT/BOLT/ROAM?

1. Press the Menu button to open the ELEMNT menu.
2. Use the Down Toggle button to scroll down to the shifter sensor.
3. Press the Right button to select MORE.
4. Battery level will be displayed on this page.

How does Shimano steps work?

What is Shimano STEPS? STEPS, which stands for Shimano Total Electric Power System, is Shimano's range of electric bike (or e-bike) components. Like other e-bike systems, such as those from Bosch, it's a pedal-assist system, which means the power is only applied when you're pedalling.

What is e-Tube app?

E-Tube Project Cyclist (Android and iOS)

Shimano's other mobile app, E-Tube Mobile, is exactly what the name implies - E-Tube for mobile. It is the mobile equivalent of the desktop application and lets you: Change button assignments. Set up synchronized shifting.