Nowadays there is little to no difference between 50 and 530 chains, but the difference originated from where 50 chains were used in industrial applications whereas 530 chains were used primarily for transport and vehicles. Therefore 50 chains were traditionally more durable but heavier and more expensive.
What does 530 mean on a chain?
We get this one a lot. The size convention for chain is set in a system of 1/8ths. The first number indicates the pitch of the chain (the distance between the centerline of the pins, link to link) a "5" indicates a 5/8ths of an inch pitch, where a "6" indicates a 6/8ths of an inch pitch (3/4").
What size is a 530 chain?
These chains are generally found on larger motorcycles. The third size is 530 – this is 3 x 1/8-inch = 3/8 (9.5mm) hence the “30”. In metric, this ranges from 24.9mm to 25.3mm. These chains are generally found on more powerful or heavier motorcycles.
What size is 50 roller chain?
# 50 chain is an American standard size that is built to ANSI B29. 1 standards. This size is commonly referred to as 5/8" pitch roller chain, which comes from the pin to pin measurement. 50 chain is one of the most widely used chain sizes out of the 14 available ANSI standard chains.
What pitch is 50 chain?
50-1 Roller chain made to ANSI b 29.1 is 5/8″ or 15.875 mm pitch. It is available in single strand 50-1 duplex 50-2 and triplex 50-3. It is possible to have the chain up to 6 strands wide.
39 related questions foundHow strong is 50 chain?
General Duty Plus #50H roller chain has a tensile strength of 8,500lbs and is constructed of high quality carbon steel. #50H heavy roller chain is commonly supplied in 10ft boxes but is also available on 50ft reels, 100ft reels, and as custom lengths per request.
How do I know my roller chain size?
Most roller chain has the size stamped right into the side plates. You may see something like "40", "C2080H" or "10B" stamped in, which the industry number that represents the chain size. Old chains will most likely need to be cleaned in order to see the size.
How wide is a 530 O ring chain?
Parts Unlimited 530 heavy duty O-Ring drive chain. This chain is 24.5mm wide (at it's widest point - the rivets) some vintage bikes can't use certain O-Ring chains if they are too wide.
What's the difference between a 520 and 530 chain?
A 520 chain is a smaller pitch chain. Pitch being the distance between rollers. The 520 is a lighter weight chain than the 530. That is why people switch to the 520, but it may not last as long as a 530.
What does 530 mean on a motorcycle chain?
A 530 chain is slightly stronger, in terms of tensile strength than a 525 and a. 50-series chain is even stronger, and is suitable for motorcycles up to 1000cc. You'll notice that stronger chains of the same pitch have wider side plates. You'll see that a 530 chain might have 8K pounds tensile strength, while the.
Will a 530 chain fit a 520 sprocket?
520, 525, and 530 will all fit on a 520 sprocket, but a 530 sprocket will only fit a 530 chain. Except in emergencies, you should always match the chain size to the sprocket size.
What does the number on a roller chain mean?
The digits to the left indicate the pitch of the chain in eighths of an inch. For example, a number 40 chain would have a pitch of four-eighths of an inch, or 1/2", and would be of the standard dimensions in width, roller diameter, etc.
What is roller chain trade size?
There are 14 sizes of roller chains regulated by ANSI . For easy reference, these are numbered 25, 35, 41, 40, 50, 60, 80, 100, 120, 140, 160, 180, 200, and 240. Some manufacturers include chain numbers 320 and 400 to the list of standardized chains.
What size is 40 chain?
40-1 Roller chain made to ANSI b 29.1 is 1/2″ or 12.7 mm pitch. It is available in single strand 40-1 duplex 40-2 and triplex 40-3.
What is chain number?
The first number is the pitch size in 1/8 inch, ie 4/8 = 1/2 inch pitch. The second number refers to the chain being a roller chain, 0 = roller chain. A 5 replacing the 0 would indicate a bush chain. The suffix, as with European standard chain, refers to the number of strands in the chain, that is 2 = duplex chain.
What is a 520 conversion?
A 520 conversion kit for is an easy way to save unsprung weight and gain performance. It may sound ridiculous, but by simply changing your regular 525/530 chain and sprockets to a 520, you'll gain roughly 1.5hp on the dyno and save nearly a kilogram.
Is 420 chain the same as 40?
Difference between 420 chain and 40 chain
Both 420 and 40 chains have the same tensile strength and pitch, the only major difference is the width between the inner plates of #40 is larger than #420 by 1/16″.
What is the difference between 40 and 41 chain?
The differences between 41 roller chain and 40 roller chain are the roller width and diameter, plate height and thickness, overall width, and tensile strength.
