Essentially, when staging, you turn on the first staging bulb or your opponent does and waits until the other racer turns on their first bulb. Then both racers in turn push in to turn on their second stage bulb. The opposite of courtesy staging is generally called double bulbing.
What does deep stage mean in drag racing?
Deep staging is the practice of rolling forward enough to turn off the prestage light. The thought behind this is you are closer to the finish line than your opponent.
How do you stage a dragster?
To deep stage, roll the car up until you trigger the prestage and stage lights, then move forward slowly until the prestage bulbs go out. This puts more of your front tires ahead of the stage beam—and less tire that needs to go through the stage beam and trigger the ET clock.
How do you read a drag racing tree?
In a Standard Tree with staggered start times, a green light will be shown to the first driver, regardless if he jumped or not, and once the second driver takes the start, if one driver jumped the start, then that driver's lane will display the red light.
What does knock the tires off mean?
Knock the tires off/blow the tires off - Spinning the tires during the pass. Tree'd [someone]/Treeing [someone] - Getting off the starting line first without jumping. Rotating the Earth - Making a fast pass. Jump - Leaving before the flashlight is turned on (false start), usually resulting in an instant loss.
33 related questions foundWhat does Duck mean in racing?
Duck-race definition
Filters. A fund-raising event where numbered plastic ducks are released in a river, with the winner being the person whose duck reaches the finish line first.
What is a door car in racing?
Drag racing vehicles and vehicle class which usually refers to sedan bodies. Door cars/door slammers still have functional doors for drivers to use. These are sometimes called door slammers, and are differentiated from funny cars which have a lightweight, single piece body that rests on a chassis. $49,000.
Why do drivers do burnouts?
Burnouts can help remove unwanted debris
Performing a burnout can help to remove any foreign matter or unwanted debris that may have collected on the tires before the race, particularly if the vehicle was coming from the pits.
What is red lighting in drag racing?
Foul Start
Also known as a red-light. When a vehicle leaves the starting line before the green light, indicated by the red light on the Tree. When a foul start occurs in eliminations, the racer is eliminated from further competition at the event (unless his or her opponent commits a worse infraction).
Why do drag racers bump in?
Bumping is when the transmission releases all the pressure on the reverse gear for a specified amount of time, allowing the car to "bump" forward. "Creep" is allowing the transmission to release some of the pressure for the duration of the time the driver holds the Secondary button.
How does a Transbrake work in drag racing?
A transbrake is activated by a driver-controlled switch that connects to a solenoid mounted on the transmission. When engaged, the transbrake applies forward/low gear and reverse at the same time. Working against each other, the vehicle is unable to move, and is effectively locked in position on the starting line.
Why have a deep stage?
The act of deep staging is to roll forward even further out of the pre-stage beams so they go out. You are hence closer to the finish line, now you have less roll out and your reaction times will be quicker but you are now closer to red lighting.
What does 1320 mean in drag racing?
The 1320 part of its name comes from the distance in feet in a quarter mile. Don't let its normal Challenger looks fool you: This Scat Pack 1320 is the fastest naturally aspirated showroom stock drag car you can buy. Dodge.
What is a good reaction time for drag racing?
When both are in place, the starter flips the switch to light the amber ready lights atop the "Christmas Tree." Exactly four-tenths of a second later the green light comes on and the driver can leave the line (thus . 400 seconds is considered a perfect Reaction Time).
What is a perfect light in drag racing?
(. 500 is a perfect light on a sportsman tree, . 400 on a Pro tree.) What this really means is that your front tire(s) left the stage beam .
How far is the Tree from the starting line in drag racing?
When the front tires of a vehicle break the first light beam, the pre-stage beam, the pre-stage lights on the Tree indicate that the racer is about 7 inches from the starting line.
How far is the Christmas Tree from the starting line?
There are two different types of sequence for the Christmas Tree. Both drag racing Christmas trees will utilize the same staging sequence where the front tires of the race vehicle cross the first invisible beam which indicates that the racer is about seven inches from the starting line.
What does pedaling mean in street racing?
Pedaling: When a driver lifts off the throttle, then gets back on it again, in an attempt to regain traction with the rear tires. Pre-staged: When a driver is approximately seven inches behind the starting line and the small yellow light atop his or her side of the Christmas Tree is illuminated.
Why do people do a burnout before a drag race?
Burnout helps warm up the tires for the race and create better traction for the tires on a specific racetrack. The skill with which the burnout is executed can determine whether the racer wins or loses. To produce an effective burnout, racers will drive their car through a light pool of water.
What do street racers use for burnouts?
VHT is what the drags use. If you want extra traction buy some Tracbite and put it on your tires for awhile. This will soften your tires and help out with traction. Tracbite will not clog up with rubber ***** like the VHT does on the surface.
What does ET mean in racing?
Car with doors. Elapsed Time (E.T.) The time it takes a vehicle to travel from the starting line to the finish line. Eliminations. When vehicles are raced two at a time, resulting in one winner and one loser.
What is a flying lap?
Essentially, a flying lap in F1 is a lap, usually in qualifying where the driver aims to post the fastest time they can. It can only be set after the driver has completed an out lap from the pits.
What is a Delaware restart?
The Delaware start is a restart style where the leader begins himself in the first row, and the other riders start twice in the first row—named after a short course beginning the process in the US state of Delaware.
