What does it mean to backfill a pool?

Backfilling a pool is the process of filling the empty space left by the inground pool with gravel, sand, or dirt. Backfilling is just one part of the pool removal process. The concrete floor and walls of the pool must be broken up and/or removed prior to backfilling.

Should I backfill around my pool?

Above-Ground as In-Ground

The pool must be filled prior to backfilling to prevent pool wall collapse and the water level in the pool must always be higher than ground level by at least 1 foot.

What should I use to backfill my above ground pool?

The earth that came out of the ground is usually the best, easiest, and least expensive material for backfilling. The concern here for some is that the earth will cause some rusting or water retention. In almost all cases, the earth will not cause any issues for the pool's wall or uprights.

Why do people fill in their pool?

Some are opting to fill in or demolish their swimming pools rather than continue to maintain or remodel them. Or maybe you have bought a house with an in-ground pool that is in need of repair, requires too much maintenance, or you can use the space for something else.

How do you fill in around a pool?

You may have already installed the pool liner and have filled the pool with water, although this can be done after you backfill around the pool walls.

Step 1: Swimming Pool Backfill Material. ...
Step 2: Arrange for the Heavy Equipment. ...
Step 3: Backfill – Tamp – Backfill – Tamp. ...
Step 4: Final Layer of Gravel.

35 related questions found

What should you backfill a pool with?

Backfilling can be done with sand, dirt, or gravel. Consider the goals of the project and the budget when choosing a fill material. The backfill materials we normally use at Superior Groundcover are class 2 fill sand and pea stone. Pea stone is the best fill material because it's self-compacting.

When should I backfill my pool?

To reduce a pool wall collapse when using an above ground as an inground, you'll need to fill the pool first, then backfill. Remember, the water level in the pool should always be higher than the ground by at least afoot.

Can an inground pool be filled in?

Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there's no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.

Can you Unfill an inground pool?

Yes, it is possible to "restore" a filled in pool. And, for those interested, a good liner company can produce a liner to fit practically any pool design and shape.

What is the cheapest way to fill a pool with water?

At an average of $0.004 per gallon, city water is the most inexpensive and most popular option. For 15,000 to 30,000 gallons, you'll pay between $60 and $120.

Is it OK to backfill an above ground pool?

But don't backfill until you've filled the pool with water. Most above-ground pools aren't designed to withstand pressure from the outside. If you backfill around an empty pool, you run the risk of the pool structure collapsing inward.

Can sand be used as fill?

Sand does not absorb water; it merely allows it to pass through. This makes sand ideal for applications in damp environments. Sand is often used for fill material in and around ponds, septic tanks, and other damp areas.

Can I partially bury an above ground pool?

And for this reason, many people ask, “Can above ground pools be partially buried?” in hopes of receiving the best of both worlds. The short answer is that “Yes, they can!” However, there are some things that should be taken into account if you're going to go down this route.

Can you backfill pool with dirt?

Simple, never use dirt to backfill your fiberglass pool. If you allow your inground pool builders to use dirt, you are getting ripped off and taken advantage of. The weight of the settling dirt with any water retention can cause the walls of the pool to bow in.

Can you backfill an Intex pool?

This is not safe because the walls of these pools are not strong enough to withstand the weight of fill material. Above-ground pools installed in a space cut out of a slope can have a small amount of backfill around them, however, to prevent soil erosion.

What is Slurry Backfill?

Page 1. NATIVE SLURRY BACKFILL is a predictable and precise structural. backfill material that uses native on-‐site material mixed with. cement and water to create a performance backfill. Native Slurry Backfill (NSB) is a controlled low-‐strength material (CLSM) utilizing the on-‐site soils.

How do you restore a pool?

How to Restore a Neglected Swimming Pool

STEP 1: REMOVE DEBRIS. It's now time to remove as much debris as possible. ...
STEP 2: DRAIN THE POOL. ...
STEP 3: CLEAR THE FILTER SYSTEM & CHECK EQUIPMENT. ...
STEP 4: SCRUB THE POOL CLEAN. ...
STEP 5: GET IT PROFESSIONALLY INSPECTED. ...
STEP 6: FILL IT UP, TEST YOUR WATER & ENJOY!

Can I reuse a pool liner?

No matter what the manufacturers say or savvy pool installers tell you, vinyl pool liners are never to be reused. Once a vinyl pool is drained, even if just for a day then it's already time to replace the entire thing.

How do you dig out an inground pool?

How to Dig an Inground Pool – Dig It!

Mark The Underground Utilities. The first thing you want to do before any digging an inground pool in your yard is make a call to Dig Safe. ...
Other Underground Stuff. Sprinklers. ...
Mark the Area, Remove the Grass. ...
Dig the Shoebox. ...
Stakes & Strings. ...
Dig the Deep End. ...
Shaping the Contours.

How much does it cost to fill a pool?

The average cost to fill in an inground pool is $4,000 to $16,000 for full demolition or $2,000 to $10,000 to fill in with dirt. An above ground pool removal costs $300 to $800, or $2,500 with a deck. The cost to get rid of a swimming pool depends on the size, depth, material, and accessibility.

How often should pool water be changed?

Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.

What do you backfill a fiberglass pool with?

When excavating for a fiberglass pool, the over-dig is typically about 12". Therefore, the deep end of the pool will be backfilled with either 6' of sand or 6' of gravel to fill in this 12" over-dig. Keep in mind here that your pool's patio (concrete deck) will be resting on top of that first 12" of backfill.

Will a concrete pool crack without water?

Additionally, a lack of water means there's a lack of moisture on the pool walls. If left exposed to long periods under the hot sun, pool finishes will dry out, creating cracks and flaking.

What is the lifespan of an above ground pool?

2018. A high-quality above ground pool from Valley Pool & Spa should last between 10 and 20 years depending on how well you care for it. However, your pool liner will not last as long as your pool. Contact a pool expert at our store to see if you need a new liner before you decide to replace your entire pool.